ZY-MH-1A Semi-autoc Fluorescent Penetrant Flaw Detection System

High sensibility self-emulsification fluorescent penetrant liquid is used. Non-poisonous solvent steam are used to soak and clean in removing procedure. As cleaned by special agents, no waste water happens in the detection line. Expensive waste water processing equipment is avoided.
Hot wind drying is not needed. After removing, the workpiece dry naturally by volatilization.
Self-display can be used and develop procedure can be avoided for workpieces which need medium or low detection sensitivity.  
Maximum size of detection workpiece: 590L x 590W x 190H (mm)
Maximum weight for one piece: 10kg      Total maximum weight: 40kg per basket